For the past sixty years, Volna Engineering has provided one-of-a-kind solutions to difficult measurement and tooling problems for the aerospace and defense industries. Significant trademarks of Volna Engineering design embody the principles of "kinematic coupling," as follows:
- Any free solid body has six possible degrees of freedom in space -- three of translation and three of rotation.
- If a body has six degrees of constraint, it has no freedom.
- If a body has more than six, a condition of stress exists.
- Removal of constraints, one at a time, allows additional degrees of freedom for a specific task in any machine or measuring instrument.
- A machine element with one necessary degree of freedom and more than five degrees of constraint will have uncertain performance (hysteresis), higher friction, and higher cost.
If you are currently planning a device, product, or machine that must possess high precision performance for the least cost, consider the use of "kinematic coupling" design principles. Contact Volna Engineering for consulting fees and possible fabrication details. One day seminars are encouraged.
Products of Kinematic Design
The following photos of Volna Engineering products are examples of kinematic design that have successfully stood the test of time with undiminished performance:
Gyro Test Table
Embodying the principles of "kinematic coupling," these roll-tumble,two-axis test tables were built for testing of Honeywell ring-laser navigation systems and have been in service for 19 years with unchanging sub-arc-second accuracy.
VTAS Nonmagnetic Head Tracker Accuracy Test Station
The first requirement of this Visual Target Acquisition System (VTAS) device is magnetic transparency. Linen phenolic and epoxy are used to fabricate the main frame. The x, y, and z "ways" are optically polished glass, straight within 10 arc-seconds. Kinematically constrained ceramic ball spindles provide arc-second accuracy after 18 years of service.
VTAS Roll Pitch Helmet Fixture
Designed for the Armstrong Laboratory, Wright Patterson Air Force Base, this Visual Target Acquisition System (VTAS) fixture provides two coincident axes of helmet rotation about a simulated tragion (top of the spinal column).
Head Tracker Accuracy Test Station
This device was produced for the U.S. Navy F-14 fighter aircraft.
Air Bearing Nonmagnetic Flight Simulator
Designed for UNISYS, this device is an example of three degrees of kinematic constraint.
Solar Energy Research
A two-axis solar tracker, which requires less than 10 watts to drive it, produces 2 kilowatts of heat energy, and heats 100 gallons of water to 100 degrees F. in 8 hours of daylight. Behind the control console are two solar stills, each of which alone desalinizes 18 gallons of salt water on an October day.
Environmentally Controlled Portable Astronomical Observatory
Designed and built for use in hostile climates.
- Chung Shan Institute of Science and Technology, Taiwan
- Micro Component Technology Corp. (MCT)
- Minnesota Mining & Manufacturing (3M)
- U.S. Air Force Wright Patterson AFB
- U.S. Navy, Bremerton, WA
Volna Engineering Facility
Volna Engineering is a sole proprietorship founded in 1968 in Minneapolis, Minnesota, by William M. Volna, a graduate mechanical engineer. The 4,000 sq. ft. company-owned facility (below) contains a wide selection of lathes, milling machines, grinding machines, and welding equipment. Computer-aided design is used in all design drawings and documentation.
In a separate facility, Volna Engineering has added an optical fabrication shop with a 16 in. diamond curve generator, several Strasbaugh polishers, a 16 ft. optical bench, a 21 in. vacuum coater, a 35 in. vacuum coater, and an 18 in. Zygo interferometer.
1808 Quincy Street Northeast
Minneapolis Minnesota USA 55418